New parallel lode confirmed at Tabakorole north west zone
Released
Released
Announcement PDF
1 September 2021
NEW PARALLEL LODE CONFIRMED AT TABAKOROLE NW ZONE
HIGHLIGHTS
Results received for the final eight diamond drillholes from the north-west zone, totalling 1,296m.
Best intercept adding continuity to existing Mineral Resource of 17m at 3.6g/t gold from surface (hole
21TBKDD018).
Confirmation of a new, shallow parallel lode of higher-grade mineralisation over at least 120m of strike,
(see Figure 1) including:
24m at 2.4g/t gold from 35m (hole 21TBKDD021); and
21m at 1.5g/t gold from 26m (hole 21TBKDD020) which is up dip of previously reported
intercept of 16m at 2.0 g/t gold from 75m (hole 20TBKRC014)1;
This parallel lode remains open along strike and at depth (and is currently only drilled to a depth of
around 90m).
Other holes in the north-west zone, designed to better define the Mineral Resource included:
14m at 1.5g/t gold from 20m and 14m at 1.0g/t gold from 41m (hole TBKDD022); and
12m at 1.4g/t gold from 9m (hole 21TBKDD019).
These are the final results from the Company’s 2021 field season and will feed into an updated Mineral
Resource estimate due for completion in September.
Marvel Gold Limited (ASX: MVL) (Marvel or the Company) is pleased to announce the final results from the
2021 resource expansion drill program at the Tabakorole Gold Project (Tabakorole or the Project), located
in southern Mali (see Figure 1). The scale and potential of Tabakorole continues to grow with the
confirmation of a shallow, higher grade parallel lode of mineralisation outside of the existing Mineral
Resource.
Managing Director, Phil Hoskins, commented: “We are very excited by the final results from our 2021 drill
campaign, which has confirmed the brownfields resource growth potential at Tabakorole. Our 2020-21
resource expansion drill program has delivered strike extensions to the north-west and south-east, improved
the grade in both the central and north-west zones and defined shallow, high-grade mineralisation outside
of the existing resource. We believe that this will result in a meaningful increase to the Mineral Resource
which is expected to be reported in September.”
The Company recently completed 3,240m of diamond drilling targeting resource growth in the central and
north-west zones of the Tabakorole deposit. Targets in the north-west zone were designed to follow up on
RC results from earlier in the year including 16m at 2.0g/t gold from 75m and 6m at 5.8g/t gold from 61m1.
This previous drilling in the north-west zone had opened the possibility of a high-grade parallel lode of
mineralisation. Drilling encountered 24m at 2.4g/t gold from 35m in the adjacent section and 21m at 1.5g/t
gold from 26m up dip from 16m at 2.0 g/t gold1 (see Figure 2). This effectively confirms this parallel lode of
1 ASX announcement 23 March 2021.
mineralisation over at least 120m of strike, which remains open along strike and at depth. Drilling within the
existing resource outline in the north-west zone has confirmed continuity of the mineralisation with the best
new intercept being 17m at 3.6g/t gold in hole 21TBKDD018 (see Figure 1 below).
Figure 1: Diamond drill results from Tabakorole’s north-west zone
Figure 2: Cross-section showing new parallel lode
2
September Mineral Resource upgrade
In total, 4,140m of diamond drilling and 5,400m of RC drilling have been completed during the 2021 field
season and will feed into an upgraded mineral resource estimate expected in September 2021. The key
highlights of this drilling are shown in Figure 3 and summarised below:
Central zone – Discovery of shallow, high-grade mineralisation outside of the existing Mineral
Resource and general improvement of grade in this region;
North-west zone – Increase in strike length by 150m, discovery of shallow, high-grade mineralisation
outside of the existing Mineral Resource and general improvement of grade in this region; and
South-east zone – Increase in strike length by 150m.
Figure 3: Plan view showing 2021 Tabakorole drilling highlights (only intercepts >10gram-metres
shown)
With an increase in strike length to both the south-east and north-west, and drilling at central zone having
identified multiple shallow intercepts outside of the previously modelled Mineral Resource, the upgraded
mineral resource estimate is expected to see enhancements to both volume and grade.
3
The results in this announcement are confined to the Tabakorole permit, which forms part of the joint
venture with UK-listed Altus Strategies plc, in which the Company currently holds a 51% interest and with
recently completed work programs is nearing a 70% interest.
This announcement has been approved for release by the Board.
PHIL HOSKINS
Managing Director
For further information, please contact:
Phil Hoskins – Managing Director
Tel: +61 8 9200 4960
Chris van Wijk – Executive Director, Exploration
Tel: +61 8 9200 4960
For more information, visit www.marvelgold.com.au.
COMPETENT PERSON’S STATEMENT
The information in this announcement that relates to exploration results at Tabakorole is based on
information compiled by Company geologists and reviewed by Mr Chris van Wijk, in his capacity as an
Executive Director and Exploration Manager of Marvel Gold Limited. Mr. van Wijk is a Member of the
AUSIMM and has sufficient experience which is relevant to the style of mineralisation and type of deposit
under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined
in the 2012 JORC Code. Mr. van Wijk consents to the inclusion in the report of the matters based upon the
information in the form and context in which it appears.
REFERENCE TO PREVIOUS ASX ANNOUNCEMENTS
In relation to the announcement of the Tabakorole Mineral Resource estimate on 30 September 2020, the
Company confirms that it is not aware of any new information or data that materially affects the information
included in that announcement and that all material assumptions and technical parameters underpinning
the Mineral Resource in that announcement continue to apply and have not materially changed.
In relation to previously reported exploration results contained in this announcement, the dates of which
are referenced, the Company confirms that it is not aware of any new information or data that materially
affects the information included in those announcements.
In relation to the previously reported exploration results contained in this announcement in Figure 3, which
were announced on 18 February 2021, 2 March 2021, 18 March 2021, 23 March 2021, 1 June 2021, 8 July
2021 and 16 August 2021, the Company confirms that it is not aware of any new information or data that
materially affects the information included in those announcements.
About Marvel Gold
Marvel Gold Limited is an Australian resources company listed on the Australian Securities Exchange under
stock code MVL. Marvel Gold is a Mali-focused gold explorer with advanced gold exploration projects and
extensive landholdings in South and West Mali.
The Tabakorole Gold Project has a JORC Mineral Resource of 910,000oz grading 1.2 g/t gold (see ASX
announcement dated 30 September 2020), with strong growth prospects along strike and via regional
prospectivity over an extensive 392km2 landholding. Tabakorole is held through 100%-owned licences as
well as two separate joint ventures, with Oklo Resources Limited (ASX: OKU) (Oklo JV), in which the Company
4
holds an 80% interest) and with Altus Strategies plc (Altus JV), in which the Company currently holds a 51%
interest.
Marvel also owns 100% of the Chilalo Graphite Project, a world-class fully permitted graphite project in
south-east Tanzania. With expenditure to date exceeding A$21M, a completed DFS and a management team
with substantial graphite market knowledge and IP, Chilalo has the potential for near-term development.
The Company has announced the intention to IPO Chilalo into a newly created company, Evolution Energy
Minerals Limited.
Marvel Gold has an experienced board and management team with specific skills, and extensive experience,
in African based exploration, project development and mining.
Table 1: Tabakorole Mineral Resource Estimate (JORC 2012)
Indicated
Inferred
Total
Mt
Au
(g/t)
koz (Au)
Mt
Au
(g/t)
koz
(Au)
Mt
Au
(g/t)
koz
(Au)
Oxide
1.0
1.3
40
1.5
1.3
60
2.4
1.3
100
Fresh
6.3
1.2
250
15.1
1.2
560
21.5
1.2
810
Total
7.3
1.2
290
16.6
1.2
620
23.9
1.2
910
Note: Reported at a cut-off grade of 0.6 g/t Au, differences may occur due to rounding.
5
Marvel Gold Project Location Map
Mali Gold Projects
Tanzanian Graphite Project
6
APPENDIX 1. SIGNIFICANT INTERCEPTS – DEFINED AS > 0.5G/T OVER >3M LENGTH
Hole ID
Drill
Type
EOH
(m)
Easting
Northing
Dip
Azimuth
From
(m)
To
(m)
Width
(m)
Grade
(g/t)
Intercept
21TBKDD017
DD
185.3
671532
1199559
-60
0
4.7
25.7
21
0.9
21m at 0.9 g/t
21TBKDD017
DD
185.3
671532
1199559
-60
0
31.7
38.3
7
1.6
7m at 1.6 g/t
21TBKDD018
DD
180
671567
1199558
-60
0
3.2
19.7
17
3.6
17m at 3.6 g/t
21TBKDD018
DD
180
671567
1199558
-60
0
96
99
3
0.6
3m at 0.6 g/t
21TBKDD018
DD
180
671567
1199558
-60
0
107
113
6
1.0
6m at 1 g/t
21TBKDD019
DD
154.2
671328
1199588
-60
0
9
21
12
1.4
12m at 1.4 g/t
21TBKDD019
DD
154.2
671328
1199588
-60
0
90
94
4
0.9
4m at 0.9 g/t
21TBKDD020
DD
102.2
671258
1199622
-55
0
26.4
47
21
1.5
21m at 1.5 g/t
21TBKDD021
DD
159.6
671186
1199617
-60
0
35
59
24
2.4
24m at 2.4 g/t
21TBKDD022
DD
153.2
671109
1199594
-55
0
19.9
34
14
1.5
14m at 1.5 g/t
21TBKDD022
DD
153.2
671109
1199594
-55
0
41
55
14
1.0
14m at 1 g/t
21TBKDD022
DD
153.2
671109
1199594
-55
0
87
91
4
0.8
4m at 0.8 g/t
21TBKDD023
DD
181
671067
1199543
-55
0
0
181
21TBKDD024
DD
180.65
671058
1199600
-60
0
27
32
5
1.0
5m at 1 g/t
NSI
APPENDIX 2. 2012 JORC CODE TABLE 1 REPORTING
Section 1 – Sampling Techniques and Data
Criteria
Sampling
Techniques
Explanation
Nature and quality of sampling (eg
cut channels, random chips, or
specific specialised industry standard
measurement tools appropriate to
the minerals under investigation,
such as down hole gamma sondes, or
handheld XRF instruments, etc).
These examples should not be taken
as limiting the broad meaning of
sampling.
Commentary
Core assay samples were collected on half core sawed lengthwise with a diamond
saw. Sampling intervals were marked by an appropriately qualified geologist
depending on geology. Sampling intervals may vary between 0.3 and 3 metres in
length with an average of 1 metre in mineralisation. Half of the core is retained on
site and the sub-sample is marked and bagged on site.
Aspects of the determination of
mineralisation that are Material to
the Public Report.
Core samples are selected based on geological criteria (including the presence of
quartz veining and sulphide mineralisation). Sample lengths are between 0.3 and
1.2m in mineralisation and may be up to 3m in unmineralised material.
All samples are crushed to -3mm, split and a 250g sub-sample is pulverised with
gold determined by fire assay/AAS based on a 30-50g charge.
Drilling
techniques
Drill type (eg core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic,
etc) and details (eg core diameter,
triple or standard tube, depth of
diamond tails, face-sampling bit or
other type, whether core is oriented
and if so, by what method, etc).
Diamond drilling was conducted using HQ (63mm in diameter) in weathered
material and then reduced to NQ (40mm in diameter) in fresh rock. Holes were
commenced with a dip of 60 degrees and oriented to be perpendicular to
mineralisation where possible. Core was oriented using a Reflex ACT II core
orientation tool.
Drill Sample
Recovery
Method of recording and assessing
core and chip sample recoveries and
results assessed.
Drill hole recoveries were recorded during logging by measuring the length of core
recovered per 3m core run. Core recovery was calculated as a percentage by
measuring the recovery of actual core length divided by expected core length.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Core recovery was routinely measured and monitored during drilling with a
minimum 90% core recovery specified in the drilling contract. There is no known
relationship between recovery and grade.
Whether a relationship exists
between sample recovery and grade
and whether sample bias may have
7
Criteria
Explanation
occurred due to preferential
loss/gain of fine/coarse material.
Commentary
Logging
Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate
Mineral
Resource
estimation, mining studies and
metallurgical studies.
All drill core is logged onsite by geologists to a level of detail sufficient to support
appropriate Mineral Resource estimation, mining studies and metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc) photography.
Logging of drill samples is qualitative and records colour, grain size, texture,
lithology, weathering, structure, strain intensity, alteration, veining and sulphides
as appropriate. Geotechnical logging records core recovery, RQD, fracture counts
and fracture sets. Density measurements are recorded for each core box using
standard dry/wet weight techniques. All drill core is digitally photographed.
The total length and percentage of
the relevant intersections logged.
All drill holes are logged in full.
If core, whether cut or sawn and
whether quarter, half or all core
taken.
Core samples are selected at intervals typically between 0.3-1.2m in length. Core
samples are labelled with a sample tag and aluminium tag recording the hole
number, depth and sample number. Core samples are cut in half using a rock saw,
with half of the sample retained in the core box and half inserted into a plastic
sample bag.
If non-core, whether riffled, tube
sampled, rotary split, etc and
whether sampled wet or dry.
Not Applicable – only Diamond drill results reported.
For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
Sample preparation consisted of jaw crushing to -3mm, splitting 500 grams and
pulverizing to 95% passing 75µ. A sub-sample of 150-200g (pulp sample) is retained
for analysis.
The sample preparation procedures carried out are considered acceptable.
Quality control procedures adopted
for all sub-sampling stages to
maximise representivity of samples.
Sample duplicates were submitted to monitor bias and ensure representative
sampling.
Measures taken to ensure that the
sampling is representative of the insitu material collected, including for
instance
results
for
field
duplicate/second-half sampling.
Duplicates, Blanks and Standards (Certified Reference Material) were used to
ensure assay quality and representativeness of sampling.
The
nature,
quality
and
appropriateness of the assaying and
laboratory procedures used and
whether the technique is considered
partial or total.
All samples were assayed for gold by fire-assay with AAS finish by SGS in Bamako,
Mali. This is considered to be a total analysis for Gold.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make
and
model,
reading
times,
calibrations factors applied and their
derivation, etc.
Not Applicable – no geophysical results reported.
Nature of quality control procedures
adopted (eg standards, blanks,
duplicates,
external
laboratory
checks) and whether acceptable
levels of accuracy (ie lack of bias) and
precision have been established.
Industry best practice procedures were followed and included submitting blanks at
a rate of 1:30 samples, field duplicates at a rate of 1:30 samples, the use of OREAS
Certified Reference Material at a rate of 1:30 samples.
The verification of significant
intersections by either independent
or alternative company personnel.
All assays are reviewed by the Competent Person and significant intercepts are
calculated as composites >0 5g/t Au with a minimum width of 3m. Composites are
produced through Database export and verified by the Competent Person.
The use of twinned holes.
No twin holes have been drilled.
Sub-Sampling
techniques
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and assaying
8
Criteria
Explanation
Documentation of primary data, data
entry procedures, data verification,
data storage (physical and electronic)
protocols.
Commentary
All drill hole logging was completed on paper logging sheets and entered into
spreadsheets before importation into the company Datashed database.
Discuss any adjustment to assay data.
No assay data was adjusted.
Accuracy and quality of surveys used
to locate drill holes (collar and downhole surveys), trenches, mine
workings and other locations used in
Mineral Resource estimation.
Drill hole collars were located using handheld GPS with 3-5m accuracy and initial
Dip and Azimuth determined using a handheld compass. A north seeking gyroscope
was used to record downhole surveys on Diamond drill holes.
Specification of the grid system used
Drill hole collars are recorded in WGS84 UTM Zone 29 North.
Quality and adequacy of topographic
control
RL recorded from handheld GPS.
Data spacing for
Exploration Results.
of
Drill hole spacing is variable depending on the location within the deposit but is
generally around 50m in areas within the Historical MRE.
Whether the data spacing and
distribution is sufficient to establish
the degree of geological and grade
continuity appropriate for the
Mineral Resource and Ore Reserve
estimation
procedure(s)
and
classifications applied.
The drill hole spacing is considered sufficient to establish the required degree of
geological and grade continuity for the estimation of mineral resources.
Whether sample compositing has
been applied.
Samples have been composited to produce a weighted grade interval using a cut
off 0.5g/t Au and a minimum width of 3m.
Whether the orientation of sampling
achieves unbiased sampling of
possible structures and the extent to
which this is known, considering the
deposit type.
Drill holes are generally oriented perpendicular to the strike of geology and shallow
dips of drilling are used to intersect the structures at a high angle.
If the relationship between the
drilling
orientation
and
the
orientation of key mineralised
structures is considered to have
introduced a sampling bias, this
should be assessed and reported if
material.
As drill holes were generally drilled perpendicular to the strike of mineralisation it
is not believed that there has been any sampling bias introduced based on the
current understanding of the structural orientations and the dip and strike of
mineralisation.
Sample
Security
The measures taken to ensure
sample security.
Drill samples were collected by Company personnel directly from the drilling rig and
transported to the exploration camp for processing. Prepared samples were then
transported directly to the laboratory by road by representatives of the company.
Other than sub sampling in the form of core cutting, no sample preparation was
conducted by the company.
Audits or
reviews
The results of any audits or reviews of
sampling techniques and data.
No audits of the current program have been carried out at this time.
Location of
data points
Data spacing
and
distribution
Orientation
of data in
relation to
geological
structure
reporting
Section 2 – Reporting of Exploration Results
Criteria
Mineral
tenement and
land tenure
status
Explanation
Type, reference name/number,
location and ownership including
agreements or material issues with
third parties such as joint ventures,
partnerships, overriding royalties,
native title interests, historical sites,
Commentary
Legend Gold Mali SARL is the 100% owner of the Tabakorole exploration licence.
The Tabakorole exploration licence was granted under Arrêté N°2015-1823 on the
25th of June 2015 and renewed on the under Arrêté N°2018-3538 on the 8th of
October 2018 (First renewal). The Tabakorole exploration licence has been
renewed under Arrêté N°2020-3933 as of the 31st December 2020 and is valid for
3 years.
9
Criteria
Exploration
done by other
parties
Explanation
wilderness or national park and
environmental settings.
Commentary
The security of the tenure held at the
time of reporting along with any
known impediments to obtaining a
licence to operate in the area.
As detailed above. There are no impediments to operating on this license.
Acknowledgment and appraisal of
exploration by other parties.
The Tabakorole project was initially covered by regional geochemical sampling by
BRGM in the 1950’s, however the first mining company to carry out work on the
license area was BHP in 1993. The first drilling was conducted by Ashanti Gold
Company in 2001. A comprehensive work history has been detailed in the
Announcement dated 17th June 2020.
The majority of the work carried out subsequently has been by Legend Gold.
Geology
Deposit type, geological setting and
style of mineralisation
The Tabakorole ore deposit as it is currently recognised is an orogenic,
hydrothermal gold deposit with much in common with other volcano-sedimentary
hosted Birimian style orogenic gold deposits throughout the region.
Drill hole
information
A summary of all information
material to the understanding of the
exploration results including a
tabulation
of
the
following
information for all Material drill
holes:
All relevant drill hole details are provided in Appendix 1 and 2.
o easting and northing of the
drill hole collar
o elevation or RL (Reduced
Level – elevation above sea
level in metres) of the drill
hole collar
o dip and azimuth of the hole
o down hole length
interception depth
and
o hole length.
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (eg cutting of high
grades) and cut-off grades are usually
Material and should be stated.
Significant intercepts are determined above a 0.5g/t Au cutoff grade with minimum
3m intercept. No top cuts have been applied.
Where
aggregate
intercepts
incorporate short lengths of highgrade results and longer lengths of
low-grade results, the procedure
used for such aggregation should be
stated and some typical examples of
such aggregations should be shown
in detail.
As above.
The assumptions used for any
reporting of metal equivalent values
should be clearly stated.
No metal equivalents are reported.
These relationships are particularly
important in the reporting of
Exploration Results.
All intercepts reported as downhole lengths. True widths of mineralisation have
not yet been determined.
If the geometry of the mineralisation
with respect to the drill hole angle is
known, its nature should be
reported.
10
Criteria
Explanation
If it is not known only the down hole
lengths are reported, there should be
a clear statement to this effect (eg
‘down hole length, true width not
known’).
Commentary
Diagrams
Appropriate maps and sections (with
scales) and tabulations of intercepts
should be included for any significant
discovery being reported These
should include, but not be limited to
a plan view of drill hole collar
locations and appropriate sectional
views.
See body of announcement for diagrams.
Balanced
reporting
Where comprehensive reporting of
all Exploration Results is not
practicable, representative reporting
of both low and high grades and/or
widths should be practiced to avoid
misleading reporting of Exploration
Results.
All results have been reported.
Other
substantive
exploration
data
Other exploration data, if meaningful
and material, should be reported
including (but not limited to):
geological observations; geophysical
survey results; geochemical survey
results; bulk samples – size and
method of treatment; metallurgical
test
results;
bulk
density,
groundwater, geotechnical and rock
characteristics; potential deleterious
or contaminating substances.
Not applicable, no other substantive exploration data reported.
Further work
The nature and scale of planned
further work (eg tests for lateral
extensions or depth extensions or
large-scale step-out drilling).
Diamond drilling at Tabakorole is ongoing. Future work is dependent on the results
of the current work.
Diagrams clearly highlighting the
areas of possible extensions,
including the main geological
interpretations and future drilling
areas, provided this information is
not commercially sensitive.
11
Share your feedback
Discover